Fayat BOMAG BW 100 ADM-5, Operating Instruction

Page: 168 / 216

3. Loosen the tensioning screw (1) and the
screw (2) on the generator.
4. Relieve and remove the V-belt.
5. Assemble a new V-belt at the generator.
6.
Tension the V-belt to the specified value
Ä
Chapter 8.8.2 ‘Checking, tensioning the
V-belt’ on page 159
.
7.
Retighten clamping screw (1) and screw
(2).
8.9.4 Checking the anti-freeze concentration and the condition
of the coolant
Protective equip-
ment:
n
Protective gloves
n
Safety goggles
1. Park the machine in secured condition
Ä
Chapter 6.9 ‘Parking the machine in
secured condition’ on page 117 .
2. Allow the engine to cool down.
3. Remove the cover (1) from the compensa-
tion tank and check the anti-freeze concen-
tration with a conventional tester.
4. Check the condition of the coolant.
5.
Thoroughly flush the cooling system if the
coolant is contaminated by corrosion resi-
dues or other suspended matter
Ä
Chapter
8.11.3 ‘Changing the coolant’ on page 179 .
6. Close the cover again.
8.9.5 Checking the hydraulic lines
This work must only be performed by an
expert / qualified person!
Fig. 156
Fig. 157
Maintenance – Every 500 operating hours
BW 100 ADM-5 168