iv
Safety Precautions
Caution
When connecting the cable, make sure to hold it by the connector portion, and do not apply
excessive force to the cable.
When disconnecting the connector, be careful not to touch the terminals inside the connector,
and do not allow foreign objects to enter the connector.
Handling Precautions
$IWHUFDUHIXOO\FRQVLGHULQJWKHLQWHQGHGXVHUHTXLUHGVSHFL¿FDWLRQVDQGXVDJHFRQGLWLRQVLQVWDOODQGXVH
WKHSURGXFWZLWKLQWKHVSHFL¿HGUDQJHV
2. Due to advances in technology, published content, including the hardware, software, and system
information published in this user’s manual are subject to change without notice.
3. When using this product, it is the responsibility of the customer to ensure necessary safety designs in
hardware, software, and systems in order to prevent any threat to life, physical health, and property due to
product malfunction or failure.
4. This product is not intended for use with nuclear power, railways, aviation, vehicles, medical equipment,
food-handling equipment, or any application where particular safety measures are required. Absolutely do
QRWXVHWKLVSURGXFWIRUDQ\RIWKHVH¿HOGV
5. This product cannot be used in applications that directly or indirectly detect human bodies for the purpose
of ensuring safety. Do not use this product as a detection device for protecting the human body.
6. Do not use this product for the development of weapons of mass destruction, for military use, or for any
other military application. Moreover, if this product is to be exported, comply with all applicable export laws
and regulations, including the "Foreign Exchange and Foreign Trade Act" and the "Export Administration
Regulations," and carry out the necessary procedures pursuant to the provisions therein.
7. For more details on conformity to the Restriction of Hazardous Substances Directive for this product,
please contact an Optex FA sales representative.
Before using this product, fully examine the applicable environmental laws and regulations, and operate
the product in conformity to such laws and regulations.
Optex FA does not assume any responsibility for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
Precautions for Laser Use
Caution
This product emits a Class 1 visible laser beam that is compliant with JIS C6802 / IEC60825-1 laser safety
standards.
,IWKLVSURGXFWZLOOEHH[SRUWHGWRWKH8QLWHG6WDWHVDSSURYDOPXVW¿UVWEHREWDLQHGIURPWKH)'$)RRG
and Drug Administration), the laser regulating body of the United States.
A report for this product has been submitted to the CDRH (Center for Devices and Radiological Health).
Do not look directly at the laser beam or intentionally shine the laser beam in another person's eyes. Doing
so may have adverse affects on the eyes, including temporary blindness.
If installing this product in your own equipment, ensure that the product is properly handled according to
the laws and regulations of the relevant country or region.
This product does not have a function that stops the emission of light from the laser during disassembly.
Do not disassemble the product.
Ramco - Optex FA Divsion
www.Optex-Ramco.com
Got Questions? 1-800-280-6933
