1-7
1
Product Overview
Mounting the Head
1-5 Mounting the Head
Caution
Please note the following when handling the sensor head cable or extension cable. Subjecting the cable to
excessive stress may cause the cable to break.
Do not pull on the cable with forces of 30 N or more.
Do not bend the cable at radiuses of 60 mm or more.
Ensure that the cable is not bent at any position less than
10 mm from the sensor head.
Tighten the sensor head mounting screws (included
screws or the like) with a tightening torque of no more
than 0.8 N·m.
Excessive tightening torque may damage the sensor head.
Mounting method
Use the included screws and other components to mount the head to the wall or to a bracket.
,QVWDOODWLRQW\SLFDOO\FRQVLVWVRIHLWKHU³GLIIXVHUHÀHFWLRQLQVWDOODWLRQV´RU³VSHFXODUUHÀHFWLRQLQVWDOODWLRQV´
which are used for measuring transparent glass, mirror surfaces, or the like.
Select the installation method according to the workpiece that will be measured.
Make sure to change the “Installation” setting of the sensor according to the installation details. (“2-7-1
Mounting” (Page 2-26))
Measurement range
'LIIXVHUHÀHFWLRQLQVWDOODWLRQ
6SHFXODUUHÀHFWLRQLQVWDOODWLRQ
10 mm or more
R60 mm or more
Ramco - Optex FA Divsion
www.Optex-Ramco.com
Got Questions? 1-800-280-6933
