2-29
1
2
W
eb Settings Screen and Function Details
Communication Screen
2-8-3 IP
address
Sets the IP address of the CDX Series product.
Default value: 192.168.0.10
2-8-4 Subnet
mask
Sets the subnet mask for the CDX Series product.
Default value: 255.255.255.0
2-8-5 Default
gateway
Sets the default gateway for the CDX Series product.
Default value: 0.0.0.0
2-8-6 Precision
Timesync
Sets one CDX Series products among multiple products as a time server to allow for high-accuracy
synchronization of the internal clocks across all sensors.
Synchronization is required when using the “Synchronous” or “Anti interfere” exposure mode.
When this function is used, one of the CDX Series products on the network must be selected as the “Master”
and the others as “Slave.”
The number of slave devices is unlimited.
OFF: This function will not be used.
Master: The sensor will be used as the master.
Slave: The sensor will be used as the slave.
Default value: OFF
Caution
If a time server already exists on the network the CDX Series product is connected to, synchronization of the CDX
Series “Master” may not occur properly.
In such cases, use the time server currently on the network as the master.
Set all CDX Series products as “Slave.”
Ramco - Optex FA Divsion
www.Optex-Ramco.com
Got Questions? 1-800-280-6933
