FASTORA DAS-315SA Disk Array
96
System Configuration
To set the raid system function, move the cursor bar to the main menu and
click the
System Configuration
link. The
System Configuration
menu will
show all items. Move the cursor bar to an item, then press
Enter
key to select
the desired function.
System Beeper Setting:
The Alert Beeper function item is used to Disabled or Enable the RAID
subsystem controller alarm tone generator.
RAID Rebuild Priority:
The Raid Rebuild Priority is a relative indication of how much time the
controller devotes to a rebuild operation. The RAID subsystem allows user to
choose the rebuild priority (Low, Normal, High) to balance volume set access
and rebuild tasks appropriately. For high array performance, specify a Low
value.
Terminal Port Configuration:
Speed setting values are 1200, 2400, 4800, 9600, 19200, 38400, 57600, and
115200.
Stop Bits values are 1 bit and 2 bits.
Note: Parity value is fixed at None.
Data Bits value is fixed at 8 bits.
