FASTORA DAS-315SA Disk Array
71
Chapter 4: Web Browser-based Configuration
The RAID subsystem web browser-based configuration utility is firmware-
based and used to configure raid sets and volume sets. You may use this utility
to:
· Create raid set,
. Expand raid set,
· Define volume set,
· Add physical drive,
· Modify volume set,
· Modify RAID level/stripe size,
· Define pass-through disk drives,
. Modify system function,
· Update firmware, and
· Designate drives as hot spares.
If you need to boot the operating system from a RAID system, you must first
create a RAID volume by using front panel touch-control keypad, Bootable CD
VT-100 utility at X86-based system, Web Browser through Ethernet LAN, or
VT-100 terminal.
Firmware-embedded TCP/IP & web browser-based
RAID manager (using the controller’s 10/100 Ethernet
LAN port)
To ensure proper communications between the RAID subsystem and Web
browser-based RAID management, Please connect the RAID system Ethernet
LAN port to any LAN switch port.
The controller has embedded the TCP/IP & Web Browser-based RAID
manager in the firmware. User can remote manage the RAID system without
