FASTORA DAS-315SA Disk Array
15
2.4 Rack-Mount
Installation
Follow the instructions in this section to properly mount your DAS-315SA
in a
rack. Before getting started, you need to prepare proper screwdrivers to
perform the procedure.
Use the following procedures to install your DAS-315SA
into a rack:
1.
Unpack your DAS-315SA
package; then remove the rack-mount kit from the
package. You should find all guide rails and brackets as shown in Figure 2-5
Figure 2-5
Please note that side rails are originally packed within the medium guide rails.
You have to take them out first.
