FASTORA DAS-315SA Disk Array
20
Parity:
None
Flow Control: None
You shall see a pop-up screen indicating that the connection has been setup
successfully. Then, you may configure the DAS with your terminal. Refer to section
3.2.3 Control Key Definition under ANSI Terminal
to learn the control keys for
terminal emulation.
Please note that if you wish to start to configure with your terminal as quickly
as possible, you may refer to
Section 4.1.2 Quick setup via Terminal
Configuration.
3.2.2 Use PC for Terminal Emulation
If you do not have a dedicated terminal, you can still use a PC configured as a
terminal, running a terminal emulation program. Microsoft Windows and
Windows 95 both have built-in terminal emulation support. Please select ANSI
terminal as the terminal type for the terminal emulation. You can also use other
terminal emulation programs such as KERMIT or VTERM. If you cannot see
anything on the screen after the session has been established, press TAB key
followed by Ctrl-D key combination to refresh the screen.
Follow the same steps discussed in section
3.2.1 Connect a Terminal to
connect your PC to the DAS.
3.3 Operation Modes
FASTORA
DAS-315SA DAS has three operation modes: Self-Diagnostic
Mode, Operation Mode, and Configuration Mode. We will discuss each of the
RAID DAS operation modes in the following sections.
