-14-
EtherCAT ID
Setting Switches
(SW1, SW2)
4.1.1
Use two rotary switches to set EtherCAT ID (ECAT Device ID). Set ones digit (x1) of EtherCAT ID on the right
rotary switch (SW1), and set tens digit (x10) of EtherCAT ID on the left rotary switch (SW2).
Setting Range is 0 ~ 99.
* The Configured Alias ID set by the rotary switches is applied when the power is supplied to the I/O module.
Input Mode (Voltage/Current) Selection Switch (SW4)
4.1.2
Select either Voltage or Current Input Mode for each channel with SW4 referring to the chart.
* Select the input mode for each channel with the Input Mode Selection Switch (SW4) before supplying power to
the module.
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
SW4.1
SW4.2
SW4.3
SW4.4
SW4.5
SW4.6
SW4.7
SW4.8
Mode
Voltage Input
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Current Input
ON
ON
ON
ON
ON
ON
ON
ON
