CONTROLS
CONTROLS
Utility Sprayer 25' / 30' / 40' / 45'
Page 68
The height of the pressure gauge and
agitation valve may be adjusted.
1.
Loosen the bolt on the mounting bar.
2.
Slide the insert to the desired height.
3.
Tighten the bolt.
The angle of the pressure gauge can be
adjusted.
1.
Loosen the nuts on the lower bolt at
the base of the bar.
2.
Slide the bolts along the track to the
desired angle.
3.
Tighten the nuts.
Section Valves
The section valves operate the solution flow
to the boom sections. Switches on the valve
control box turn the boom sections on or off.
Pressure is monitored on the pressure
gauge. Pressure can be adjusted by
actuating the pressure switch on the control
pad or by adjusting the agitation valve.
NOTE: The number of valves may vary
by model.
Section valves are mounted below the tank
in front of the center boom section.
Figure 16: 30-foot Boom model
Figure 17: Boomless model
Summary of Contents for UT3P25
