Fast UT3P25, Owner'S Manual

Page: 97 / 104

PREPARING FOR STORAGE
PREPARING FOR STORAGE Utility Sprayer 25' / 30' / 40' / 45' Page 97
4. Run the machine until anti-freezing
solution reaches the foamheads.
5. Check the air- and liquid-lines for
holes and replace as required. Be
sure to flush, then drain, all liquid
from the system prior to storage in
freezing temperatures.
Removing from Storage
1. Clear the area of bystanders,
especially small children, and remove
foreign objects from the machine and
working area.
2. Attach the tractor to the Sprayer.
3. Check:
a. Attach and secure all liquid
lines.
b. Row Units and Nozzles.
c. All hardware. Tighten as
required.
d. Tire pressure.
e. All hydraulic lines, fittings,
and connections. Tighten as
required.
f. The tanks for cracks or
damage.
g. Tank straps and hold-down
hardware.
4. Lubricate all grease fittings. See
LUBRICATION & MAINTENANCE .
5. Replace any defective parts.
6. Drain the tank. See Tank Drain
Procedure .
7. Add a small amount of liquid to the
tank. Check that liquid comes out of
each nozzle/injector.
8. Calibrate the pump, nozzles, and
Sprayer before using. See
SPRAYER CALIBRATION .
9. Follow the Pre-Operation Checklist
before using.