PREPARING THE MACHINE
PREPARING THE MACHINE
Utility Sprayer 25' / 30' / 40' / 45'
Page 42
PREPARING THE MACHINE
Use the Tractor Operator’s
Manual
Always refer to tractor operator's manual for
specific detailed information regarding
operation of equipment.
Assembly
Upon arrival, the Utility Sprayer will require
initial assembly. This will typically be
completed by a Fast Ag Solutions dealer.
Drain and Rinse Tank
The Utility Sprayer is shipped with a small
amount of RV antifreeze in the tank. The tank
must be drained and rinsed before use.
Drain Filters
1.
Place a pail under the filter.
2.
Remove the drain plug from the filter.
3.
Allow it to drain.
4.
Replace the plug.
5.
Repeat for any additional filters.
6.
for any additional instructions.
Drain Tank
1.
Locate the tank drain below the tank.
2.
Place a pail or container under the
drain.
3.
Disconnect the fitting from the tank.
4.
Allow all fluid to drain.
5.
Reinstall the hose fitting.
6.
Add 10 gallons of water to the tank.
7.
Disconnect the fitting from the tank.
8.
Allow the rinse water to drain.
9.
Reinstall and tighten the hose fitting.
Summary of Contents for UT3P25
