Fasep RASE.3030, Instruction Manual

Page: 52 / 60

52 User manual
Table top fails to clamp rims
Handle engagement unit faulty.
• Check it is synchronised properly.
• Replace the plate of the turntable.
• Check there are no burrs.
• Replace the locking handle.
Table top mounts or demounts wheels with difficulty
Insufficient belt tension.
• Adjust tension or replace belt.
Vertical head does not raise or does it too far from rim
Clamping plate not adjusted.
• Adjust plate.
• Restore setting.
Vertical head does not raise or does it too far from rim
Clamping plate not adjusted.
• Adjust plate.
• Restore setting.
Vertical and horizontal limit stops do not operate
No air passing through clamping handle / valve.
• Check hose circuit.
• Replace handle / valve.
Column does not tilt
Column tilting cylinder faulty.
• Replace column opening cylinder.
No air supply to cylinder.
• Hoses folded.
• Replace valve.
• Check tightness of arm pivot.
Clamping arm cylinders leak air
Faulty piston or gaskets.
• Replace pistons and gaskets.
Column tilts violently or too slowly
Incorrect release valve setting.
• Adjust air delivery regulators on control valve.
Tyre pressure gauge needle fails to return to 0
Pressure gauge faulty or damaged.
• Replace pressure gauge.
Wheel lifter not working
Control out of operation.
• Check pedal board.
Rises slowly or has insufficient force.
• Check for folded hoses.
• Adjust delivery on pedal board.
• Replace the valve on the lifter pedal control board.
Cylinder leaking air.
• Replace cylinder gaskets.
• Replace cylinder.