Fasep RASE.3030, Instruction Manual

Page: 49 / 60

User Manual 49
device operates automatically whenever the compressed air supply to the machine is cut off. Drain
the condensation manually (push-button C, fig. 35) when the level exceeds the mark X, fig. 35.
- Clean the top plate of the turntable every week: remove any accumulated dirt and clean with
environmentally-friendly solvents.
- Monthly checks:
• Clean the arms of the tool-carrying head, the bead breaking unit and the relative travel screws
with environmentally-friendly solvents only. Lubricate.
• Check the oil level in the air lubricator (fig. 35) and, if necessary, top up with non-detergent SAE20
oil to the indicated level Z.
• Clean with a dry cloth. Avoid contact with solvents.
• Check the oil flow-rate through the transparent cover K (correct flow-rate: 1 drop of oil every 4
bead breaking cycles). Adjust if necessary by turning the set screw Y fig. 35.
CAUTION
Keep the working area clean.
Never use compressed air, jets of water or solvent to remove dirt or deposits off the machine.
When cleaning, take care not to create and raise dust as far as possible.
ENVIRONMENTAL INFORMATION
The following disposal procedure shall be exclusively applied to the machines having the crossed-out
bin symbol on their data plate.
This product may contain substances that can be hazardous to the environment or to human health
if it is not disposed of properly.
We therefore provide you with the following information to prevent releases of these substances and
to improve the use of natural resources.
Electrical and electronic equipment should never be disposed of in the usual municipal waste but
must be separately collected for their proper treatment.
The crossed-out bin symbol, placed on the product and in this page, remind you of the need to
properly dispose of the product at the end of its life.
In this way it is possible to prevent that a not specific treatment of the substances contained in these
products, or their improper use, or improper use of their parts may be hazardous to the environment
or to human health. Furthermore this helps to recover, recycle and reuse many of the materials used
in these products.
For this purpose the electrical and electronic equipment manufacturers and dealers set up proper
collection and treatment systems for these products.
At the end of life of your product contact your dealer to have information on the collection arrangements.
When buying this new product your dealer will also inform you of the possibility to return free of
charge another end of life equipment as long as it is of equivalent type and has fulfilled the same
functions as the supplied equipment.
A disposal of the product different from what described above will be liable to the penalties prescribed
by the national provisions in the country where the product is disposed of.
We also recommend you to adopt further measures for environment protection: recycle the internal and
external packing of the product and properly dispose of dead batteries (if contained in the product).
With your help the amount of natural resources used to produce electrical and electronic equipment
can be reduced, the use of landfills for the disposal of the products, minimized, and the quality of life
improved by preventing that potentially hazardous substances are released into the environment.