Fasep RASE.3030, Instruction Manual

Page: 39 / 60

User Manual 39
Also check that rims are not deformed, that their fixing holes have not become oval, that they are
not scaled or rusty and that they do not have sharp burrs on the valve holes.
Check that the tyre is in good condition with no signs of damage.
Mounting the tyre
1 • Tyre preparation (fig. 25)
- Grease both the tyre (A) beads.
- Place the tyre on the rim (B)
2 • Head positioning (fig. 25a)
- Operate pedal (13) to move the head into its working position.
NB: The tool is already in the correct position for mounting the tyre, unless the type of rim
has been changed.
3 • Lower bead mounting (fig. 26)
- Place the bottom bead of the tyre underneath the tool and at the same time apply a little pressure
to the tyre by hand while starting to rotate the wheel (pedal 15) for easier bead insertion.
- Rotate until tyre mounting is complete.
25a
25