Fasep RASE.3030, Instruction Manual

Page: 35 / 60

User Manual 35
position A to contemporarily unlock working arm and horizontal arm. The tool will move upwards
in its rest position (Fig.20A).
With the locking button in position B, the tool can move freely downwards up to the rim edge or up
to the minimum working height (Fig.20A). Press the locking button in position C to contemporarily
lock vertical and horizontal arms (Fig.20A). In this case the tool will be automatically positioned at
a security distance from the rim edge.
- Make the head go down on the rim (push button 9).
- For correct tool positioning, the insert (G) must be at the end position with the rim edge (C), where
the vertical wall begins.
ATTENTION : Use the handle 37 to achieve the correct tool positioning on the rim.
- Press the block 9 to fix the tool (C) position.
The distance between rim and tool head will remain unchanged till the control button is in locking
position.The operator can tilt the vertical post (i.e. when handling a set of tyres having same di-
mensions) without repositioning the tool on the rim.
ATTENTION : Risk of hand crushing between demounting / mounting tool and the wheel.
8 • Upper tyre bead coupling (fig. 21) A-B-C
- Create enough space between the rim and the tyre with the bead breaker disc to allow the de-
A
B
C
20a
G
20
9
28
20
13