28
28
111628E
Revision date: 02.16.23
INSTALL THE SUPPLY MANIFOLD
4
Assembly Instructions
Complete these steps to attach the supply manifold to the frame:
1. Move to the supply end of the frame and attach one (1) 106808
pipe hanger to the frame in the locations shown. Secure each
hanger to the frame using one FA4472B Tek screw and the
magnetic nut setter.
Circles identify hanger position on frame.
Required parts:
• (14) 112305 (18" Supply Tube w/ Micro Valve)
• (14) 112306 (28" Supply Tube w/ Micro Valve)
• (14) 112307 (38" Supply Tube w/ Micro Valve)
• (1) 112309 (3/4" PVC Supply Manifold)
• (4) 106808 (3/4" Pipe Hangers)
• (4) FA4472B Tek Screws and Magnetic Nut Setter
(5/16" x 2-9/16")
106808 Pipe Hanger
Slide the 106808
hanger over the Tek
screw and attach to
the frame.
Before the screw
is tight, align the
hanger on the frame
as shown to prepare
for the manifold
installation. Tighten
the screw.
Repeat to install all
remaining 106808
pipe hangers.
In the locations
shown on the
diagram (lower-left),
predrill a mounting
hole using an
FA4472B Tek screw.
Nut
Setter
FA4472B Tek
Screw
