11
Revision date: 02.16.23
111628E
1
ASSEMBLE MAIN FRAME: Two (2) Base Rails
Gather the parts and complete the steps that follow to assemble the two (2) long base rails.
Assembly Instructions
Required parts for
each base rail
:
• (1) S15P116 Square Tube (plain) for base rail
• (2) 104625 2-Way Connector and (1) 104626 3-Way Connector
• FA4482B Tek Screws and Magnetic Nut Setter (3/8" x 2-9/16")
Complete these steps:
1. Slide one 3-way connector onto one end of the S15P116 tube. Center the connector on the tube.
Do not secure at this time.
2. Attach one 2-way connector to each end of the tube as shown.
Verify that each connector is tight to the end of the tube.
Secure using one Tek screw
for each connector. Verify that the length of the assembled tube is 119 1/2".
3. Repeat the steps to assemble the remaining base rail.
4. Continue by assembling the outer frame tubes.
S15P116
Base Rail
Open end of
connector
104625
Connector
S15P116
Base Rail
Open end of
connector
Open end of
connector
Length 1
19 1/2"
outside-to-outside
Center this connector
on the base rail. Do not
secure at this time.
ASSEMBLED BASE
RAIL
