13
Revision date: 02.16.23
111628E
1
Assembly Instructions
ASSEMBLE MAIN FRAME: Assemble Frame
Gather the different assembled components and complete
the steps that follow.
Required parts for this procedure:
• (2) Assembled End Support Frames
• (1) Partially Assembled Mid Support Frame
• (14) S15P036 Square Tube (plain) for support arms
• 113157 Fodder Tray Supports
• Assembled base rails (2) and assembled outer frame
tubes (14)
• FA4482B Tek Screws and Magnetic Nut Setter (3/8" x 2-9/16")
ATTENTION:
Install Tek screws as shown.
Review all diagrams
for clarification. ASSISTANTS ARE NEEDED TO ASSEMBLE
THE FRAME. DO NOT ATTEMPT ALONE.
Complete these steps:
1. Gather the two (2) end support frames, one (1) middle support
frame, and two (2) assembled base rails.
2. With assistance, assemble the frame as shown in the diagram.
Install base rails flush with the ends of the end support frames.
3. Check outside-to-outside dimensions of the assembled base.
Length at 119 1/2"; width at 73 3/4".
NOTE:
If dimensions are incorrect for assembled frame,
verify that you have installed base rails flush with ends of
end support base tubes. Also verify that the length of each
assembled base rail is 119 1/2".
73 3/4"
1
2
Install so tube and
2-way fitting are flush.
2
3
