3
Revision date: 01.27.20
1
ATTACH LEG TUBES
Assemble frame on a flat, level surface.
8-3/4"
8-3/4"
Assemble as shown. Legs are 8-3/4" from
the end of each FT15G16L09000S1 tube.
FT15VMGL01800S1
FT15G16L09000S1
FT15VMGL01800S1
112772 Flat
Head Bolt
8-3/4"
Attach Leg Tubes
112772
5/16" x 3" Flat
Head Bolt
112477
FALB34B
Complete these steps to install each 112477 insert:
1. Add one FALB34B nut to threaded stud of each
113030S01 foot and attach one foot to each
112477 insert.
2. Slide one 112477 insert assembly into bottom of
each 18" vertical leg tube. Tap gently with a small
hammer if needed to seat in place.
3. Secure each insert to each tube using two (2)
112838 Tek screws.
Install screws through leg
tube and wall of the 112477 insert and not the
open side of the insert. Install screws slightly
off center line of the leg tube to prevent contact
with threaded rod.
4. Adjust 113030S01 leveler so it is seated against
threaded plate of insert and locknut. See diagram
to the right.
5. Secure leg tubes to the FT15G16L09000S1 tubes using the 112772 flat head bolts.
Bottom
of Leg
Tube
112477
FALB34B
Locknut
113030S01
x
x
Steps 3 & 4
