2
Revision date: 01.27.20
REQUIRED TOOLS
The following list identifies the main tools needed to
assemble the system. Additional tools may be
needed.
• Level (4'– recommended)
• Wrench set to level frame
• Ratchet with 1/2" socket to assemble frame
• 3/16" hex (Allen) wrench—preferably one that
can be used in a socket to operate with a drill.
• Adjustable pliers and small hammer
• Gloves to handle tubing
• 1-1/8" and 1-3/8" hole saw bits
• Tool to cut 3/4" tubing
READ THIS DOCUMENT BEFORE YOU BEGIN
Thank you for purchasing the 113502 Ebb & Flo system. When properly assembled and maintained, this system will provide years of reliable service. These
instructions include helpful hints and important information needed to safely assemble the system. Please read and understand these instructions
before
you
begin. If you have any questions during the assembly, contact customer service.
ASSEMBLY PROCEDURE
Following the instructions as presented will help
ensure the proper assembly of your system.
The steps outlining the assembly process are as
follows:
1. Verify that all parts are included in the
shipment. Notify customer service for
questions or concerns. See below.
2. Read and understand these instructions and
the information included with the shipment
before
you begin.
3. Gather the tools and assistants.
4. Assemble the system.
Important Information
SAFETY PRECAUTIONS
• Wear eye protection.
• Wear gloves when handling metal pipes.
• Use a portable GFCI (Ground Fault Circuit
Interrupter) when working with power tools and
cords.
112838
Tek Screw
FALB34B
112772
112770
113030S01
112477
FAME51B
FAG338B
PICTORIAL GUIDE
Larger parts may not be shown.
111303
111698
111301
111302
TIMER REQUIRED – ADDITIONAL PURCHASE
This system requires a timer to control water pump
and to set watering cycles. Timer is not included and
requires an additional purchase.
If you do not have a timer for your system, contact
your sales representative for additional information.
