Manual
KOMPAKTOMAT K500PS | K600PS | K700PS | K800PS | K1000PS
46
│
56
10.
MAINTENANCE AND REPAIRS OF THE MACHINE
Observe the safety instructions and regulations for maintenance and repairs.
Check that all screws and other assembly points are tight before each use of the machine and whenever
needed.
Regularly check the prescribed pressure in tyres of the machine and the condition of the tyres.
Regularly check the wear and tear of the working parts of the machine. The quality of work decreases
with the worn working parts.
Lubricate all indicated lubrication places according to Chapter 10.1.
Replace shares according to Chapter 10.2.
Adjusting, cleaning and lubricating the machine may only be performed when the machine is standing
still, i.e. the machine is stopped and is not working.
When adjusting, cleaning, maintaining and repairing the machine, secure the folding and rotary parts of
the machine that could put the operator in danger by fall or other movement.
When repairing the unfolded machine parts, use a suitable support device leaning against labelled
places or appropriate places.
For attaching the machine when manipulating it with the use of lifting equipment, use only places
marked by stick-on labels with the symbol of a chain
.
If there is a defect or damage on the machine, immediately turn off the tractor engine and secure the
engine from turning on, secure the set and the machine against movement
then you can remove the
defect.
When repairing the machine, use only original spare parts, suitable tools and protective equipment.
Order original spare parts according to the Spare Parts Catalogue.
If you have to weld during the repair and have the machine attached to the tractor at the same time,
the supply cables have.
We do not recommend cleaning the hydraulic piston-rods and bearings of working rollers by high-pressure
wash or by washing with direct water stream.
The sealing of the piston-rods and bearings of the rollers might get damaged during high-pressure wash or
direct stream of water.
