Manual
KOMPAKTOMAT K500PS | K600PS | K700PS | K800PS | K1000PS
22
│
56
STA
N
D
A
R
D
E
QUI
PM
EN
T O
F T
H
E M
A
CH
INE
HYDRAULIC CIRCUIT FOR SIDE FRAME FOLDING
- ONE RED RING
Pressurizing this branch of the circuit folds side frames into the
transport position.
Flow limiters
reducing the speed
of the piston-rod
operation are used
in the circuit.
The precise position
can be found in the
Spare Parts
Catalogue.
HYDRAULIC CIRCUIT FOR SIDE FRAME FOLDING
- TWO RED RINGS
Pressurizing this branch of the circuit unfolds side frames into
the working position.
HYDRAULIC CIRCUIT FOR AXLE CONTROL
- ONE YELLOW RING
Pressurizing this branch of the circuit brings the axle into the
position when the machine rides on the working rollers and
the axle wheels are in the air.
HYDRAULIC CIRCUIT FOR AXLE CONTROL
- TWO RED RINGS
Pressurizing this branch of the circuit lifts the transport axle
into the transport position, i.e. the machine rides on the axle
tyres.
OP
TI
ONAL E
QUI
PM
EN
T O
F T
H
E M
A
CH
INE
HYDRAULIC CIRCUIT FOR FRONT LEVELLER POSITION CONTROL
- ONE BLUE RING
Pressurizing this branch of the circuit brings the leveller up
from the surface.
Flow limiters
reducing the speed
of the piston-rod
operation are used
in the circuit.
The precise position
can be found in the
Spare Parts
Catalogue.
HYDRAULIC CIRCUIT FOR FRONT LEVELLER POSITION CONTROL
- TWO BLUE RINGS
Pressurizing this branch of the circuit recesses the leveller to
the surface.
HYDRAULIC CIRCUIT FOR SHARE WORKING DEPTH CONTROL
- ONE GREEN RING
Pressurizing this branch of the circuit brings shares out of the
processed profile.
HYDRAULIC CIRCUIT FOR SHARE WORKING DEPTH CONTROL
- TWO GREEN RINGS
Pressurizing this branch of the circuit recesses shares into the
processed profile.
HYDRAULIC CIRCUIT FOR DRILL MACHINE FAN FLUID MOTOR DRIVE
- ONE BLACK RING
The Dn20 circuit branch is used for draining oil directly into the oil tank of the tractor.
The maximum permissible pressure in the waste hose is 5 bar; higher pressure
pushes the shaft sealing out which damages the fluid motor fan.
If no suitable outlet into the tank is not installed in the tractor, consult the
manufacturer (dealer) of the tractor who will provide information about the
possibilities of a free waste end piece.
HYDRAULIC CIRCUIT FOR DRILL MACHINE FAN FLUID MOTOR DRIVE
- TWO BLACK RINGS
The Dn12 circuit branch is connected to the circuit with oil delivery priority.
Pressurizing this branch of the circuit delivers oil to the fluid motor drive of the fan.
The maximum permissible pressure is 130 bar, maximum flow rate is 40 l/min.
