Manual
KOMPAKTOMAT K500PS | K600PS | K700PS | K800PS | K1000PS
34
│
56
The height of the front leveller is set in relation to the size of the clods and the field unevenness. The
height of the leveller has to be adjusted according to the current conditions. When the leveller is too
low, it will drag too much soil along, which reduces the tractor output. When the leveller is too high, it
will not work, which will affect the final quality of work of the machine. We recommend to keep the
leveller approx. 3cm above the surface when the machine is lowered down to the working rollers.
7.2.1
FL – Front Fixed Serrated Levelling Bar
The automatic release of the leveller is protected by a draw spring. The spring is factory-set to the
length of 340mm; however, it is possible to change the preloading as needed. The spring preloading is
selected according to the character of the field (size of clods in the field). The bigger the clods are, the
higher the preloading needs to be.
Use an auxiliary control lever to make the manual leveller height setting easier.
7.2.2
L – Front Levelling Paddle Bar with Flexible Segments
The automatic release of the leveller segments is secured by a flat spring of each segment.
The preloading of the flat springs can be changed by manually turning the whole row of segments.
Min.320mm
Max.370mm
