Manual
KOMPAKTOMAT K500PS | K600PS | K700PS | K800PS | K1000PS
50
│
56
11.
MACHINE STORAGE – LONG-TERM MACHINE SHUTDOWN:
Store the machine under a roof, if possible.
Store the machine on an even and solid ground with sufficient bearing capacity.
Clean the machine before storing and make sure that the machine is not damaged during the storage. Pay
special attention to all labelled lubricating places and lubricate the machine according to the lubrication
plan.
Store the machine with folded frames in the transport position. Leave the machine on the axle and the
standing leg; secure the machine against movement with wedges or other suitable instruments.
The machine must not be leaning on the shares as they may get damaged.
Prevent access by unauthorized persons to the machine.
Lower the axle of the machine into a lower position with the use of the hydraulic circuit; secure the piston-
rods with ball valves.
Lowering the height of the machine on the axle when laying it off
12.
PROTECTION OF ENVIRONMENT
Check the tightness of the hydraulic system regularly.
Replace or repair hydraulic tubes or other parts of the hydraulic system showing signs of damage, before
oil starts to leak.
Check the condition of hydraulic tubes and execute their timely replacement. The usable life of hydraulic
tubes also includes the storage time.
Treat oils and lubricants according to valid acts and regulations on wastes.
13.
MACHINE DISPOSAL AFTER SERVICE LIFE EXPIRY
The operator must secure during machine disposal that steel parts and parts, in which hydraulic oil or
lubricating grease moves are differentiated.
Steel parts must be cut by the operator while observing safety regulations and handed over to the
secondary raw material collection point. He must proceed with other parts according to valid laws about
waste.
Lo
w
er
ax
le
s b
y t
h
e
p
is
to
n
-ro
d
Secure the machine
against movement
-hand brake
-leveller-pans under
wheels
