Manual
EXCELENT Premium 6; 8
7
│
52
B.
TRANSPORTING THE MACHINE
B.1
(1)
The vehicle intended for the transportation of the machine must have at least the same bearing capacity
as the weight of the transported machine is. The total weight of the machine is stated on the production
label.
B.2
(2)
The dimensions of the transported machine including the vehicle must comply with valid regulations for
traffic on ground communications (decrees, acts).
B.3
(3)
The transported machine must be always attached to the vehicle so that it cannot be released during
transportation.
B.4
(4)
The carrier is responsible for damages caused by the release of incorrectly or insufficiently attached
machine to the vehicle.
C.
MANIPULATING THE MACHINE BY LIFTING EQUIPMENT
C.1
(1)
The lifting equipment and binding instruments intended for manipulation with the machine must have at
least the same bearing capacity as the weight of the manipulated machine is.
C.2
(2)
The machine may only be attached for manipulation in designated places marked by stick-on labels
showing a “chain”.
C.3
(3)
When attached (suspended) in designated places, it is not allowed to move in the area of potential reach
of the manipulated machine.
D.
TRANSPORTING THE MACHINE ON GROUND
COMMUNICATIONS
Transport Position of
EXCELENT Premium 6; 8
Attach the machine to the tractor by hanging with the use of the two-point suspension equipment
(TPM 3).
Lift the machine on the axle, move the ball valve into the position closed, Picture
18
/p.17.
The side frames must be folded in the vertical position and into the machine so that they do not
protrude through the boundary of the machine.
The machine must be equipped with removable shields displaying the boundaries, functional
lighting and a board of rear label for slow vehicles (pursuant to EEC No.69).
The lighting must be turned on when in operation on ground communications.
The tractors must be equipped with a special light appliance with orange colour that must be turned
on when in operation on ground communications.
The operator must drive with increased caution and consideration for other participants of the
traffic.
The operator must secure the arms of the rear TPM of the tractor in the transport position when
operating on ground communications. At the same time, the arms of the rear TPM of the tractor
must be secured against swinging sideways.
It is strictly forbidden to transport people or load on the machine or connect another
machine, semi-trailer or additional equipment to it.
The maximum transport speed on ground communications is
25 km/hour.
For better safety, the folding and unfolding of the machine is blocked and it can only be done when
the machine is fully lifted on the transport axle.
Transport is forbidden when visibility distance is reduced!
The machine may only be operated on ground communications if it is equipped with air brakes
(the customer will receive the MOT certificate). Otherwise, the machine must not be operated on
ground communications!
