Manual
EXCELENT Premium 6; 8
31
│
52
4.5.5
Setting the Range of the Sowing Machine
This setting is already preset by the producer and it depends on the type of the machine. It is not necessary
to adjust the setting during regular operation. Press the button for setting the sensors of sowing and adjust
by pressing plus or minus to the required range. A red line will appear below the number to indicate
editing. Leave the menu by pressing the button again.
4.5.6
Setting the Range of the Sprayer
This setting depends on the used range of the sprayer. Press the button for setting the sensors of sowing
and adjust by pressing plus or minus to the required range. A red line will appear below the number to
indicate editing. Leave the menu by pressing the button again.
4.5.7
Setting the Start of Sowing
This is where you set which side of the field you start sowing. Three values of the direction can be set
(from the left, from the middle, from the right). Press the button for setting the start of sowing and adjust
by pressing plus or minus to the required range. A red line will appear below the number to indicate the
side of the start of sowing. Leave the menu by pressing the button again.
Picture 45 – Setting the start of sowing
FROM THE LEFT
FROM THE MIDDLE
FROM THE RIGHT
4.6.
OPERATING DISPLAY 3 – TRIAL SOWING
This is where you set and calibrate the required sowing, see Chapter 6 SETTING THE SOWING.
The number of impulses is preset by the producer and it depends on the type of machine. It is not necessary to
adjust this setting during regular operation.
Picture 46 – Display 3 – Trial sowing
5.
FILLING UP THE SEED/FERTILIZER CONTAINER
When filling up the container, always observe safety regulations and instructions.
The machine must be fully unfolded and must be resting on the working bodies on the ground.
Only fill up the container on a solid and flat surface and when the machine is standing still.
Use the access ladder for access to the service platform.
Uncover and store the protecting canvas on the hooks located on the side of the hopper.
Remove the central brace rod and place it on the canvas.
Fill up the hopper with the required type and volume of seeds/fertilizer.
Return the central brace rod back and cover the hopper with the protecting canvas.
Push in the access ladder after you leave the service platform.
The platform is only intended for the operator for filling up the container.
It is strictly forbidden to use the platform during driving and operation of the machine.
The bearing capacity of the platform is limited to
3 persons or 280kg at the most!
Be extra careful when moving on the platform.
It is strictly forbidden to transport persons or cargo on the machine!
