100
31
Shutting down the machine
Shutting down the machine for a longer period of time:
-
Park the machine under a roof if possible.
-
Park the machine on a level and firm surface with sufficient capacity.
-
Before storing the machine, remove dirt and preserve it so that the machine does not suffer any damage
during storage. Pay special attention to all marked lubrication points and lubricate them properly according
to the lubrication schedule.
-
Park the machine in the transport position with the frames folded down. Park the machine on the axle and
parking leg, secure the machine against unintentional movement with wheel chocks or other suitable aids.
-
The machine must not rest on the discs.
There is a risk of damaging the machine’s discs.
-
Secure the machine against unauthorized access.
32
Environmental protection
-
Regularly check the hydraulic system for leaks.
-
Preventive replacement or repair of hydraulic hoses or other parts of the hydraulic system showing signs
of damage before an oil leak occurs.
-
Check the condition of the hydraulic hoses and replace them in good time. The service life of hydraulic
hoses also includes the time for which they were stored.
-
Dispose of oils and fats in accordance with applicable waste laws and regulations.
33
End of life machine disposal
-
When disposing of the machine, the operator must ensure that steel parts and parts in which hydraulic oil
or grease moves are distinguished.
-
The operator must cut the steel parts in accordance with the safety regulations and hand them in at a
collection point for secondary raw materials. They must proceed with other parts in accordance with the
applicable waste laws.
34
Service and warranty conditions
Service favor
Service is provided by a sales representative, after consultation with the manufacturer or the manufacturer directly.
Spare parts through the sales network by individual dealers throughout the country. Use spare parts only in
accordance with the spare parts catalog officially issued by the manufacturer.
Guarantee
Machine with registration for MY Farmet, warranty 24 months.
Machine without registration, 12 months warranty.
-
The manufacturer provides a 24-month warranty on the following machine parts: main frame, axle and
drawbar of the machine. The manufacturer provides a 12-month warranty on other parts of the machine.
The warranty is provided from the date of sale of the new machine to the final consumer (user).
-
The warranty covers hidden defects that appear during the warranty period when the machine is used
properly and when the conditions specified in the instructions for use are met.
-
The warranty does not apply to wear parts, normal mechanical wear of replaceable parts of working parts
(coulters, blades, etc.).
-
The warranty does not cover indirect consequences of possible damage, such as reduced service life, etc.
-
The warranty is tied to the machine and does not expire with a change of owner.
-
The warranty is limited to disassembly and assembly, or replacement or repair of the defective part. The
decision whether a defective part will be replaced or repaired belongs to the Farmet contract workshop.
-
During the warranty period, repairs or other interventions on the machine may only be carried out by the
manufacturers authorized service technician. Otherwise, the warranty will not be recognized. This
provision does not apply to the replacement of wear parts.
-
The warranty is conditional on the use of original spare parts from the manufacturer.
