11
7.
The machine operator can only enter the machine structure only at standstill position and when the machine
is blocked from movement for the following reasons:
-
Adjustments of working parts of the machine,
-
Repair and maintenance of the machine,
-
Unlock or secure the axle ball valves,
-
Securing the axle ball valves before lowering the side frames,
-
Adjustment working parts of the machine after folding side frames.
8.
(xxx)
When climbing on the machine don’t step on tires of the pneumatic roller or other spinning parts. They
can spin and you can fall and have serious injuries.
9. However, the changes are, or adjustments on the machine can be done only with written agreement of the
manufacturer. The manufacturer is not responsible for any damage resulting from non-compliance with this
instruction. The machine must be maintained with the prescribed accessories, equipment and facilities,
including safety markings. All warning and safety signs must be legible at all times and in place. In case of
damage or loss the marks must be immediately renewed.
10. When working with machine the operator must have the Manual of using with requirements of safety work
available.
11.
The operator cannot using the alcohol when working with machine, or pills, or narcotics and halucinating
substances, which they increased lower attention and coordinated abilities. If the operator must consume a
pills prescribed by a doctor or consuming free pills for sale must be informed by a doctor that in these
circumstances is capable to work responsibly and safely operate the machine.
Safety tools
For operation and maintenance:
-
Tight-fitting clothes
-
Safety gloves and safety glasses for dust protection and sharp parts of the
machine.
5
Transporting machine by means of transport
1. The means of transport designed to transport of the machine must have a load of capacity at least equal to the
weight of the transported machine. The total weight of the machine is listed on the nameplate.
2.
The dimensions of the transported machine including the means of transport must meet with the valid
regulations for operation on roads (decrees, laws).
3.
The transported machine must always be attached to the vehicle in such a way that it cannot be released
spontaneously.
4.
The carrier is responsible for damage causes of an incorrectly or insufficiently attached machine to the vehicle.
6
Handling the machine with transport equipment
1. Lifting equipment and binding instruments using for manipulation with the machine must have its own load
capacity minimum equal with weight of the machine being handled.
2.
Attachment of the machine for manipulation may only be carried out in places designed for this purpose and
marked with self-adhesive labels showing the
„chain”.
3.
After attachment (suspension) in places designated for this purpose, it is forbidden to move in the area of
possible reach of the manipulated machine.
