98
Maintenance plan
Maintenance operation
Daily
(season)
40 h
Before the
season
After the
season
Time
interval
Damage check, possible replacement
X
X
Safety device
Lighting and safety hatched boards
– check condition,
functionality and cleanliness
X
X
Warning and safety labels
– presence and legibility check
X
Lubrication schedule of the machine
Drawbar joint/suspension eye - grease
X
X
Parking brake bolt
– grease or suitable oil
X
X
Axle bearings
– grease containing LITHIUM – inspection,
possible filling
X
After season
The whole machine
Perform treatment and cleansing; do not spray plastic parts with oil or similar means
Spray the piston rods of the hydraulic cylinders with suitable anti-corrosion agents
Check the strength of all screw and plug-in connections (see table of tightening torques)
Check electrical wiring for damage and replace if necessary
Brake system
Before the last ride, preserve with antifreeze (approx. 0,1l) without ethanol, use the one recommended by the tractor
manufacturer
Secure the machine against movement with wheel chocks
Release the parking brake, bleed the air and close the brake lines
The service and parking brakes must be released during the winter to prevent them from sticking to the brake drum
Lubrication points
Lubricate the lubrication points according to the lubrication schedule, with KP2P-20 Likx grease according to DIN 51 502
PREVENTION means to eliminate the problem planned out of the season without stress and comfortably before
a secondary problem, accident or health threat arises.
30.1.1
Lubricant nadling
- Treat lubricants and oils as hazardous waste in accordance with applicable laws and regulations.
- Protect yourself from direct contact with oils and lubricants by using gloves or protective creams.
- Wash oil marks on the skin thoroughly with warm water and soap. Do not clean the skin with petrol, diesel or other
solvents.
- Oil or grease is toxic. If you have swallowed oil or grease, see a doctor immediately.
- Protect children from contact with lubricants and oils.
