Farm King TVR12, Operator And Parts Manual, Page: 52 / 112

Operation - TVR12, TVR14, TVR16 V-Rake
50
Leveling
Figure 46
Connect the V-Rake to tractor.
Lower the jack (Item 1) until the entire weight of
the hitch is supported
[Figure 46] .
IMPORTANT
Use adequate supports as required before
loosening the clevis mounting bolts.
Remove the clevis mounting bolts (Item 2) and
nuts
[Figure 46] .
Raise or lower the jack until the V-Rake frame is
parallel with the ground. Reinstall the mounting
bolts and nuts.
Tighten bolts to correct torque.
Adjustments
Windrow Width
Figure 44
Adjust the windrow width by changing the rear
rake wheel mounts (Item 1)
[Figure 44] :
• Increase width by using the forward mounts
• Decrease width by using the rear mounts
Rake Wheel Height
Figure 45
Adjust the rake wheel height by turning in / out the
stop (Item 1) at the end of the lifting rod (Item 2).
Secure with jam nut
[Figure 45] .
FRONT
FRONT
1
1
2
2
1