Farm King TVR12, Operator And Parts Manual, Page: 34 / 112

Assembly - TVR12, TVR14, TVR16 V-Rake
32
Lift Tubes
Figure 21
Install the tube stop (Item 1) and wing nut (Item 2)
to wing mount (Item 3)
[Figure 21] .
Install one handle (Item 4) and pin to the stop
[Figure 21] .
Figure 22
Before sliding the lift tubes through the mounts,
position the hydraulic cylinder (Item 1), pin
connector (Item 2), and compression spring (Item
3) to the wing mount
[Figure 22] .
Attach the barrel end of the cylinder to wing mount
using one clevis pin (Item 4) and two clips
[Figure
22] .
1
3
2
4
4
1
2
3
Attach the pin connector (Item 4) to the lift tube
using two 1/2” x 3” hex bolts and two 1/2” lock
nuts
[Figure 23] .
The pin hole (Item 5) of the lift tube should be just
ahead of the wing mount (Item 2)
[Figure 23] .
Figure 23
When lift tubes are installed, pass the tube (Item
1) through the wing mount (Item 2), compression
spring (Item 3), and pin connector (Item 4)
[Figure
23] .
1
2
5
3
4