Farm King TVR12, Operator And Parts Manual, Page: 33 / 112

Assembly - TVR12, TVR14, TVR16 V-Rake
31
Figure 18
Pass the support wheel axle (Item 1) through the
hub, bushings, and yoke. Attach the axle to the
yoke using one 1/2”-13NC x 2.125” hex bolt (Item
2), two 1/2” flat washers, and one 1/2” lock nut
[Figure 18] .
Attach one retaining plate (Item 3) to the opposite
side of the yoke using one 1/2”-13NC x 2.125” hex
bolt (Item 4), two 1/2” flat washers, and one 1/2”
lock nut
[Figure 18] .
Attach one 1” slotted nut (Item 5) to the axle.
Secure the nut with a cotter pin
[Figure 18] .
Figure 19
The support wheels at the ends of wing frames
are attached directly through the frame (Item 1)
[Figure 19] .
Figure 20
Place one shim on the yoke stem (Item 1) of the
wheel assembly
[Figure 20] .
Position the yoke stem through the mount.
Assemble the upper brake pad (Item 2), lower
brake pad (Item 3), and disc (Item 4) on the yoke
stem and mount
[Figure 20] .
Attach the break disc with one spring pin (Item 5)
through the yoke stem
[Figure 20] .
Attach the break pads with one 1/2” x 3-1/4” hex
bolt (Item 6), one compression spring (Item 7), one
1/2” flat washer, and one 1/2” wing nut (Item 8)
[Figure 20] .
TVR14, TRV16
2
1
3
5
4
1
6
3
8
7
4
5
2
1