Farm King TVR12, Operator And Parts Manual, Page: 31 / 112

Assembly - TVR12, TVR14, TVR16 V-Rake
29
Figure 13
Position the LH closure arm (Item 1) on the LH
wing, forward of the brackets (Item 2)
[Figure 13] .
Attach the LH closure arm (Item 1) to the LH wing
using two plates (Item 3), four 3/4” x 7-1/2” hex
bolts, eight 3/4” flat washers, and four 3/4” lock
nuts
[Figure 13] .
Do not tighten hardware.
Attach one wing link (Item 4) to the LH closure arm
using one 1-1/4” x 5-1/2” pin (Item 5), one 5/16” x
2-1/4” hex bolt, and one 5/16” lock nut
[Figure 13] .
Attach the wing link to the slide link using one
1-1/4” x 4-3/4” pin (Item 6) and two clips
[Figure
13] .
Tighten hardware.
Repeat to install RH closure arm and wing link.
Rear Axle Wheels
Figure 14
Position the wheel hub (Item 1) on the rear spindle
(Item 2). Place one 7/8” flat washer (Item 3) on the
spindle. Thread one 7/8” slotted nut (Item 4) onto
the spindle and secure the nut with one 1/8” x
1-1/2” cotter pin. Install the dust cap to the spindle
[Figure 14] .
Place the wheel (Item 5) on the hub and align the
holes with the studs. Attach wheel using five wheel
nuts
[Figure 14] .
Repeat to install both LH and RH wheels.
1
5
3
4
2
6
4
5
1
3
2
FRONT