Farm King TVR12, Operator And Parts Manual, Page: 28 / 112

Assembly - TVR12, TVR14, TVR16 V-Rake
26
Rear Frame
Figure 8
Position the LH (Item 1) and RH (Item 2) lights on
top of the mounting plates (Item 3)
[Figure 8] .
Position the indented portion of the mounting
plates facing forward.
Position the harness of each light facing forward.
Position the red lens of each light on the outside of
the mounting plates.
Attach each light using four 1/4” x 1” hex bolts,
eight 1/4” flat washers, and four 1/4” lock nuts.
Attach the light module (Item 4) to the underside of
the RH mounting plate using two #8-32 x 0.75” flat
head machine screws and two 0.136” nylon lock
nuts
[Figure 8].
3
4
3
2
1
FRONT
RH
LH
Hitch
Figure 6
Attach the hitch base (Item 1) to the hitch clevis
(Item 2) using one 1/2” x 4-1/2” hex bolt (Item 3)
and 1/2” lock nut
[Figure 6] .
Attach the hitch assembly to the frame using two
5/8” x 5” hex bolts (Item 4), four 5/8” flat washers,
and two 5/8” lock nuts
[Figure 6] .
Figure 7
Attach the jack (Item 1) to the hitch mount using a
retaining pin
[Figure 7] .
Attach the safety chain (Item 2) to the hitch mount
using one 1” x 4” hex bolt (Item 3), two 1” flat
washers, and one 1” lock nut
[Figure 7] .
2
1
3
4
1
2
3