Farm King 12112, Operator And Parts Manual

Page: 39 / 158

Assembly - Backsaver Auger 12112 / 12122
39
Figure 24
Raise the lower truss tube weldment and align the
mounting holes of the lower tube weldment (Item 1) and
lower truss arms (Item 2)
[Figure 24] .
Figure 25
Install two 1/2” x 1-1/2” bolts (Item 1) through the tube
adjustment bracket (Item 2)
[Figure 25] , slotted hole of
the lower truss tube weldment and lower tube weldment
mount. Install one 1/2” flat washer and 1/2” lock nut onto
the bolts (both sides).
Figure 26
Locate two 1/2” x 6-1/2” threaded rods (Item 1). Thread
two 1/2” nuts (Item 2)
[Figure 26] approximately half way
onto each threaded rod.
Install the threaded rods through the two tube adjustment
brackets. Install one 1/2” nut (Item 3)
[Figure 26] onto
each end of the threaded rod.
Figure 27
Sight down the top of the tube (from the intake end) to
verify that the lower tube weldment is in line with the
lower truss tube weldment
[Figure 27] .
B-3011
2
1
B-3012
1
2
B-3013
2
1
3
3
B-1170
OFFSET TO THE RIGHT SIDE
OFFSET TO THE LEFT SIDE
TUBES ALIGNED