Farm King 12112, Operator And Parts Manual

Page: 41 / 158

Assembly - Backsaver Auger 12112 / 12122
41
Figure 30
Install a strap (Item 1) [Figure 30] towards the end of the
lower tube weldment.
Connect the strap to an approved lifting device.
Raise the lower tube weldment until the bottom side of
the tube contacts the cradles (Item 2)
[Figure 30] of the
lower truss tube weldment.
Figure 31
Align and install one 2-bolt half clamp (Item 1) [Figure
31] over the lower tube weldment (all locations on lower
tube weldment). Align the bolt holes and maintain equal
space between the two mounts.
Install two 3/8” x 1-1/2” bolts (Item 2) [Figure 31] down
through the 2-bolt half clamp and lower truss tube
weldment cradle (both sides). Install one 3/8” lock nut
onto each bolt (both sides). Repeat procedure for each 2-
bolt half clamp on the lower truss tube weldment.
Figure 32
Install a strap (Item 1) through the bracing of the top truss
tube weldment (Item 2)
[Figure 32] . Connect the strap to
an approved lifting device.
Raise and move the top truss tube weldment to the
assembly area.
B-1035
1
2
B-1037
1
2
EQUAL SPACE
When tightening the half clamp bolts and nuts,
verify the lower tube remains level as each 2-bolt
half clamp is tightened, and verify the lower tube
remains level until the last 2-bolt half clamp on the
lower tube has been tightened.
B-3053
2
1