Farm King 12112, Operator And Parts Manual

Page: 31 / 158

Assembly - Backsaver Auger 12112 / 12122
31
GENERAL ASSEMBLY INFORMATION
Component Unloading And Identification
Unload the crate(s) and components in flat level area of
adequate size to assemble the 12112 / 12122 Backsaver
Auger.
NOTE: If any components are damaged, missing or
replacement parts are required, contact your
Farm King Dealer.
Assemble the 12112 / 12122 Backsaver Auger in the
following order:
1. Undercarriage (See “Undercarriage Assembly” on
page 32.)
Using the packing list, locate and place all
undercarriage components and hardware in one
area. Count the individual components and verify that
you have received the correct number of components
to fully assemble the undercarriage.
2. Tube (See “Tube Assembly” on page 36.)
Using the packing list, locate and place all tube
components and hardware in one area. Count the
individual components and verify that you have
received the correct number of components to fully
assemble the tube.
3. Hopper Drive Tube (See “Hopper Assembly And
Installation” on page 60.)
Using the packing list, locate and place all intake
auger components and hardware in one area. Count
the individual components and verify that you have
received the correct number of components to fully
assemble the intake auger.
4. Hydraulic (See “HYDRAULIC ASSEMBLY” on
page 65.)
Using the packing list, locate and place all hydraulic
components in one area. Count the individual
components and verify that you have received the
correct number of components to fully assemble the
hydraulics.
Figure 3
Larger components are marked for identification [Figure
3] .
ELECTROCUTION HAZARD
To prevent serious injury or death from
electrocution:
• Be aware of overhead power lines.
• Keep away from power lines when unloading and
assembling the auger.
• Electrocution can occur without direct contact.
• DO NOT permit bystanders to be in the work area
when unloading and assembling the auger
components.
• DO NOT work under suspended parts.
• Keep away from moving parts.
• Always use lifting devices / vehicles, chains or
straps of adequate size and strength when
unloading and assembling the auger
components.
Unload crate(s) and auger components carefully,
not to cause damage to any of the components.
B-3000
EXAMPLE