FARFISA INTERCOMS FT 105P, Installation, Programming, And User'S Manual

Page: 40 / 56

1 5
P
R
O
G
R
A
M
M
I
N
G
FT
105P
208P
Table FT105P
0 LD dialling of extensions on external line
1 DTMF dialling of extensions on external line
0 disables warning tone to remind the end of LD dialling time on
external line
1 enables warning tone to remind the end of LD dialling time on
external line
0 intercom call no. 1 (terminal 6a) lasts 25 sec.
1 intercom call no. 1 (terminal 6a) lasts 5 sec.
0 intercom call no. 2 (terminal 6b) lasts 25 sec.
1 intercom call no. 2 (terminal 6b) lasts 5 sec.
0 disables D.I.S.A. over external line
1 enables D.I.S.A. over external line
3333-17 _ _ _ _ _ 10000
Code Numbers to be dialled Base
To program:
pick up the handset (dialling tone);
dial the access code 333317;
dial 5 digits to program the requested general services (see Table). Always dial a
number of 5 digits even if some services remain unchanged.
wait for the acknowledgement tone and hang up.
Example FT105P: if the following code has been dialled:
33331710101
- external line has DTMF dialling. The warning tone reminding the end of the LD dialling
time is disabled.
- intercom call no. 1 lasts 5 sec, while intercom call no. 2 lasts 25 sec.
- the D.I.S.A. function is enabled
Notes
- If the intercom card (art. ES60 or ES65) is not present, either 0 or 1 can be inserted when
programming the duration of the intercom call.
- In case of DTMF lines, use only DTMF telephones.
Example FT208P: if the following code has been dialled:
33331711001001
- external lines has DTMF dialling. The warning tone reminding the end of the LD dialling
time is disabled.
- intercom call no. 1 lasts 5 sec, while intercom call no. 2 lasts 25 sec.
- the D.I.S.A. function is enabled for external line 2, but not for external line 1.
3 8
FT
105P
208P
I
N
T
E
R
C
O
M
S
1 audio to external station (transmission)
2 audio from external station (reception)
3 ground
4 common conductor for relay 1 exchange. The terminal is grounded;
to disconnect it, cut the jumper W1
5 relay 1 exchange normally open (max 1A)
6a intercom call no. 1 (12 Vac – 150 mA)
6b intercom call no. 2 (12 Vac – 150 mA)
C2 common for relay 2
NA2 relay 2 exchange normally open (max 1A)
NC2 relay 2 exchange normally closed (max 1A)
C3 common for relay 3
NA3 relay 3 exchange normally open (max 1A)
NC3 relay 3 exchange normally closed (max 1A)
C4 common for relay 4
NA4 relay 4 exchange normally open (max 1A)
NC4 relay exchange 4 normally closed (max 1A)
Terminals only
available on the
ES65 intercom
card.
TERMINAL SPECIFICATIONS OF THE INTERCOM CARDS