1 3
P
R
O
G
R
A
M
M
I
N
G
FT
105P
208P
HOW TO ENABLE THE PERSONAL SERVICES
This procedure allows for enabling the ‘do not disturb’, ‘follow me’ and ‘timed follow me’
services described on pages 27 and 28.
0
all services are disabled
1
‘do not disturb’ is enabled
2
‘follow me’ and ‘time follow me’ are enabled
3
all services are enabled
Table
Type of service
Code
Telephones
41 42 43 44 45 46 47 48
Base
Enabled services
3333-16
_
_
_
_
_
_
_
_
00000 000
To program:
pick up the handset (dialling tone);
dial the access code 333316;
- (only FT105P) – dial 5 digits to program 5 extensions (see Table). Always dial a
number of 5 digits even if extensions are less than 5.
- (only FT208P) – dial 8 digits to program 8 extensions (see Table). Always dial a
number of 8 digits even if extensions are less than 8.
wait for the acknowledgement tone and hang up.
FT208P
FT105P
FT105P 333316xxxxx
FT208P 333316xxxxxxxx
only the ‘do not disturb’ service is enabled for extensions 41 and 42
all the services are disabled for extensions 43, 44 and 45
all the services are enabled for extension 46
only the ‘follow me’ and ‘timed follow me’ services are
enabled for extensions 47 and 48
3333 16 1 1 0 0 0 3 2 2
Example: if the code below has been dialled:
4 0
INTERCOM PROGRAMMING
The PABX must be correctly programmed for the intercom card to work.
Part of the intercom programming is described in the chapter “How to program the
system” on page 14.
ENABLING THE INTERCOM INTERFACE
Select the desired service for each telephone and write the number in the table below.
0 the extension: - is not enabled to have conversations with the external intercom station
- is not enabled to activate relays (door-opener, staircase lighting, etc.)
1 the extension: - is enabled to have conversations with the external intercom station
- is not enabled to activate relays (door-opener, staircase lighting, etc.)
2 the extension: - is not enabled to have conversations with the external intercom station
- is enabled to activate relays (door-opener, staircase lighting, etc.)
3 the extension: - is enabled to have conversations with the external intercom station
- is enabled to activate relays (door-opener, staircase lighting, etc.)
Table
Type of service
Code
Telephones
41 42 43 44 45 46 47 48 Base
Day intercom enabling
3333-10
_
_
_
_
_
_
_
_
33333 333
Night intercom enabling
3333-12
_
_
_
_
_
_
_
_
00000 000
To program:
pick up the handset (dialling tone);
dial the access code 333310 (day) or 333312 (night);
- (only FT105P) – dial 5 digits to program 5 extensions (see Table). Always dial a number
of 5 digits even if extensions are less than 5.
- (only FT208P) – dial 8 digits to program 8 extensions (see Table). Always dial a number
of 8 digits even if extensions are less than 8.
wait for the acknowledgement tone and hang up.
FT208P
FT105P
day
night
FT105P 333310xxxxx
333312xxxxx
FT208P 333310xxxxxxxx
333312xxxxxxxx
FT
105P
208P
I
N
T
E
R
C
O
M
S
Summary of Contents for FT 105P
Page 1: ...Installation Programming and User s Manual FT 105P and FT 208P PABX February 2003 Mi 2236 gb...
Page 2: ...ACI Srl FARFISA Intercoms reserves the right to modify the products illustrated at any time...
Page 55: ...ACI Srl FARFISA Intercoms reserves the right to modify the products illustrated at any time...
