9
P
R
O
G
R
A
M
M
I
N
G
FT
105P
208P
HOW TO ASSIGN INCOMING EXTERNAL LINES
Select the incoming lines to be assigned to each telephone and fill-in the table below.
0
the extension:
- is not enabled to receive calls from the external lines
1
the extension:
- is enabled to receive calls from external line 1
2
the extension:
- is enabled to receive calls from external line 2
3
the extension:
- is enabled to receive calls from external lines 1 and 2
Note:
The assignment of the incoming calls also allows for answering to D.I.S.A. calls (if
enabled).
For FT105P, only insert number 0 or 1.
Table
Type of service
Code
Telephones
41 42 43 44 45 46 47 48
Base
Day incoming calls
3333-07
_
_
_
_
_
_
_
_
33333 333
Night incoming calls
3333-09
_
_
_
_
_
_
_
_
00000 000
FT208P
FT105P
Example: if the code below has been dialled, in day service:
3333 03 3 1 2 2 3 1 0 2
extension 41 can receive any type of calls and answer unanswered calls
extension 42 can receive internal calls and answer unanswered calls
extension 43 can receive any type of calls, but not answer unanswered
calls
extension 44 can receive any type of calls, but not answer unanswered
calls
extension 45 can receive any type of calls and answer unanswered
calls
extension 46 can receive internal calls and answer unanswered
calls
extension 47 can receive internal calls only, but not answer
unanswered calls
extension 48 can receive any type of calls, but not answer
unanswered calls
4 4
Operation
If the actuator card is included in the intercom card, also refer to the previous chapter for
programming and operation.
pick up the handset
- call waiting tone
dial 78 followed by the number of the relay to be activated
1
relay 1
2
relay 2
3
relay 3
4
relay 4
select the relay action (only for relays 2, 3 and 4)
0
the relay is deactivated
1
the relay is activated permanently
2
the relay is activated for 3 seconds
hang up after the acknowledgement tone.
Example: - dial 7821 to activate permanently relay 2. To deactivate it, dial 7820.
- dial 7832 to activate only for 3 seconds relay 3.
REMOTE ACTIVATION OF AUXILIARY RELAYS USING A CODE
This service only works when calling over the public line with a DTMF telephone.
It allows the user with password to activate from long distance the 4 actuator relays for
auxiliary services (lights, thermostats, heating and air conditioning installations, etc.) by
making a call to the user’s number.
Storing the passwords for external line 1 and 2
Chose a 4-digit password for line no. 1 and no.2 (i.e. 0190, 3233, 0010, etc.) and write them
in the table below.
Programming
Code
Password to be stored
Base
External line 1 password
3333-20
_ _ _ _
****
External line 2 password (only FT208P) 3333-21
_ _ _ _
****
* not factory-set. If programmed, these codes will be blanked when restoring the base
programming (see page 5).
0, 1 or 2
1, 2, 3 or 4
78
FT
105P
208P
I
N
T
E
R
C
O
M
S
Summary of Contents for FT 105P
Page 1: ...Installation Programming and User s Manual FT 105P and FT 208P PABX February 2003 Mi 2236 gb...
Page 2: ...ACI Srl FARFISA Intercoms reserves the right to modify the products illustrated at any time...
Page 55: ...ACI Srl FARFISA Intercoms reserves the right to modify the products illustrated at any time...
