Faraday MPC-6000, Programming Manual

Page: 12 / 40

M P C 6 0 0 0 / 7 0 0 0 P R O G R A M M I N G M A N U A L
8
5 Notifications
appliance circuits
Configure the behavior of the NACs and the
output zone that will activate each NAC. Note
that a NAC must be configured as connected to
an output zone or it will not activate.
Optional 6 LCD Annunciators If there are any remote LCD displays, set
whether installed.
Optional 7 Remote LEDs If there are any remote LED modules, configure
each of the remote LEDs. Select the Output
zone that will activate the LED.
Optional 8 Remote Relays If there are any remote Relay modules,
configure each of the remote Relays. Note that
the Relays must be connected to an Output
Zone in order to activate.
Optional 9 DACT line/DACT
account If a dialer is installed, configure the line and
account data.
10 Validate Run the validate and fix any errors that are
reported.
11 Activate Swap the backup configuration with the primary
configuration.