Fanvil C62 Page 2 User Manual Download | Manualshive

Page: 2 / 102

background image

Fanvil Technology Co., Ltd

HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China

Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737

Safety Notices

Please read the following safety notices before installing or using this phone. They are crucial for the safe

and reliable operation of the device.



Please use the external power supply that is included in the package. Other power supplies may cause

damage to the device, affect the behavior or induce noise.



Before using the external power supply, please be sure it is for use with your power voltage. Incorrect

power voltage may cause fire and damage.



Please do not damage the power cord. If the power cord or plug is damaged, do not use it. This may

cause fire or electric shock.



The power plug should be accessible at all times because this is the only way to remove power from the

device.



Handle the phone carefully. Do not drop it or shake it. Rough handling can cause internal damage.



Do not install the device in direct sunlight. Also do not put the device on carpets or cushions, or other

poorly ventilated locations. This may cause fire or overheating.



Avoid exposure to temperatures above 40

℃

, below 0

℃

or high humidity. Avoid wetting the unit with

any liquid.



Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. If cleaning is

necessary use a soft cloth that has been slightly dampened in a mild soap and water solution.



Do not touch the power cord or network cable during a thunderstorm. There is a slight risk of

electrical shock.



Do not attempt to open the device. Consult your authorized dealer for repair.

«
1
2
3
4
...
»

Summary of Contents for C62







































































































Reviews:

No comments

Related manuals for C62

Brand: Panasonic Pages: 5

Brand: Panasonic Pages: 312

Brand: Panasonic Pages: 311

Brand: Samsung Pages: 2

Brand: Samsung Pages: 62

Brand: Samsung Pages: 48

Brand: Samsung Pages: 33

Brand: Samsung Pages: 2

Focus S SGH-I937

Brand: Samsung Pages: 175

Brand: Samsung Pages: 2

Brand: Samsung Pages: 24

Brand: Samsung Pages: 2

Brand: Samsung Pages: 145

Brand: Samsung Pages: 167

Brand: Audiovox Pages: 18

SRM9030plus Garioch

Brand: Scot-tel Garioch Pages: 2

Brand: Alcatel Pages: 51

Brand: i.safe MOBILE Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands