Fanvil C62 User Manual Download Page 83 | Manualshive

Page: 83 / 102

Fanvil C62 User Manual Download Page 83

Fanvil Technology Co., Ltd

HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China

Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737

Update Interval

Specify the update interval time. Default is 1 hour.

Update Mode

1. Disable – no update

2. Update after reboot – update only after reboot.

3. Update at time interval – update at periodic update interval

TR069 Settings

Enable TR069

Enable/Disable TR069 configuration

ACS Server Type

Select Common or CTC ACS Server Type.

ACS Server URL

ACS Server URL.

ACS User

User name for ACS.

ACS Password

ACS Password.

TR069 Auto Login

Enable/Disable TR069 Auto Login.

"Inform" Sending Period

Time between transmissions of “Inform” Unit is seconds.

8.3.6.2

Syslog

Syslog is a protocol used to record log messages using a client/server mechanism. The Syslog server

receives the messages from clients, and classifies them based on priority and type. Then these messages will

be written into a log by rules which the administrator has configured. There are 8 levels of debug

information.

Level

Name

Description

0

Emergency

System is unusable. This is the highest debug info level.

1

Alert

Action must be taken immediately.

2

Critical

Critical conditions. System is probably working incorrectly.

3

Error

Error conditions. System may not work correctly.

4

Warning

Warning conditions. System may work correctly but needs attention.

5

Notice

Normal but significant condition.

6

Informational

Normal daily messages.

7

Debug

Debug messages normally used by system designer. This level can

«
...
81
82
83
84
85
...
»

Summary of Contents for C62







































































































Reviews:

No comments