Fanvil C62 User Manual Download

Page: 54 / 102

Fanvil Technology Co., Ltd

HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China

Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737

Conference Number

Number to dial to access network conference server. Not needed

if Local conference mode is chosen

Registration Expires

SIP re-registration time. Default is 3600 seconds. If the server

requests a different time, the phone will change to that value.

Enable Service Code

Enables or disables the services described below. These codes

will be sent to the SIP server to activate or deactivate the service.

DND On Code

Do Not Disturb (DND) – When this hot key is pressed, all calls to

the extension to be rejected by the server. The incoming call

record will not be displayed in the Call History.

DND Off Code

Disable Server DND as described above.

Always CFwd On Code

Always Call Forward On – When this function is enabled, the

server will forward all calls to a designated number. The

incoming call record will not be displayed in the Call History.

Always CFwd Off Code

Disable Server Always CFwd as described above.

Busy CFwd On Code

Busy Call Forward On - When this function is enabled, the server

will forward all calls to a designated number if the telephone is

busy. The call record will not be displayed in Call History.

Busy CFwd Off Code

Disable Server Busy CFwd as described above.

No Ans. CFwd On Code

No Answer Call Forward On - When this function is enabled, the

server will forward all calls to a designated number if there is no

answer within a designated time. The incoming call record will not

be displayed in the Call History.

No Ans. CFwd Off Code

Disable Server No Ans. CFwd as described above.

Ban Anonymous On

Code

Ban Anonymous On – When this function is enabled, the server

will disallow the phone to make anonymous calls.

Ban Anonymous Off

Code

Allow Anonymous Calling function described above. In other

words “Anonymous” will be transmitted for Caller ID.

Keep Alive Type

Specifies the NAT keep alive type. If OPTION is selected, the

phone will send OPTION sip messages to the server every NAT

Keep Alive Period. The server will then respond with 200 OK.

If UDP is selected, the phone will send a UDP message to the

server every NAT Keep Alive Period.

Keep Alive Interval

Set the NAT Keep Alive Interval. Default is 60 seconds

User Agent

Set SIP User Agent value.

DTMF Type

DTMF sending mode. There are four modes:



In-band (Relay)



RFC2833



SIP_INFO

Summary of Contents for C62







































































































Search results

Summary of Contents for C62

Reviews:

Related manuals for C62

Brands by name

Popular brands

Fanvil C62, User Manual

Search results

Summary of Contents for C62

Reviews:

Related manuals for C62

Brands by name

Popular brands