Fanvil C62 Page 45 User Manual Download | Manualshive

Page: 45 / 102

background image

Fanvil Technology Co., Ltd

HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China

Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737

Field Name

Explanation

Enable LLDP

Enable or Disable Link Layer Discovery Protocol (LLDP)

Packet Interval

The time interval for sending LLDP Packets

Enable Learning Function

Enables the telephone to synchronize its VLAN data with the

Network Switch. The telephone will automatically synchronize

DSCP, 802.1p, and VLAN ID values even if these values differ

from those provided by the LLDP server.

Enable DSCP

Enable or Disable Differentiated Services Code Point (DSCP)

SIP DSCP

Specify the value of the SIP DSCP in decimal

Audio DSCP

Specify the value of the Audio DSCP in decimal

Enable WAN Port VLAN

Enable or Disable WAN Port VLAN

WAN Port VLAN ID

Specify the value of the WAN Port VLAN ID. Range is

0-4095

SIP 802.1P Priority

Specify the value of the voice 802.1p priority. Range is 0-7

Audio 8021P Priority

Specify the value of the signal 8021.p priority. Range is 0-7

LAN Port VLAN Mode

Follow WAN: LAN Port ID is same as WAN ID

Disable: Disable Port VALN

Enable: Specify a VLAN ID for the LAN port which is different

from WAN ID

«
...
43
44
45
46
47
...
»

Summary of Contents for C62







































































































Reviews:

No comments

Related manuals for C62

Brand: i.safe MOBILE Pages: 49

Brand: i.safe MOBILE Pages: 37

Brand: Unitech Pages: 2

Brand: switel Pages: 4

Brand: Alcatel Pages: 48

Verizon CDM-9500

Brand: Audiovox Pages: 146

Premium Reflexes OmniPCX 4400

Brand: Alcatel Pages: 62

Brand: Sagem Pages: 115

Brand: HTC Pages: 310

Brand: Sagem Pages: 64

Brand: Allview Pages: 82

Brand: Pantech Pages: 70

Brand: Uplink Pages: 16

Brand: Hisense Pages: 42

Brand: Zte Pages: 88

Brand: Lava Pages: 12

Brand: Lemon Pages: 71

Brand: Lemon Pages: 94

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands