Fanvil C62 User Manual Download Page 48 | Manualshive

Page: 48 / 102

Fanvil C62 User Manual Download Page 48

Fanvil Technology Co., Ltd

HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China

Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737

Leased Time

Time IP address assignments will persist. Unit is minutes.

DNS Server Address

IP address of DNS server.

Add

Click this button to add this lease table

DHCP Lease Table

Delete

Enter the table name and click the Delete button to remove a DHCP

lease table.

Enable DNS Relay

Activates DNS Relay in the phone. Default is enabled.

Notes:

1.

The size of lease table cannot be larger than the quantity of C network IP address. It is

recommended to use the default lease table without modification

2.

If the DHCP lease table is modified, the phone must be rebooted.

8.3.2.6

TIME&DATE

Set the time zone and SNTP (Simple Network Time Protocol) server on this page. Daylight savings time

configuration and manual time and date entry are also done on this page

«
...
46
47
48
49
50
...
»

Summary of Contents for C62







































































































Reviews:

No comments