Fanvil C62 User Manual Download | Manualshive

Page: 13 / 102

background image

Fanvil Technology Co., Ltd

HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China

Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737

1.6.5

Power Indication LED (Power Light Enabled)

LED Status

Description

Steady red

Power on.

Blinking red

There is an incoming call.

Off

Power off.

1.6.6

Power Indication LED (Power Light Disabled)

LED Status

Description

Blinking red

There is an incoming call

2

Initial Connection and Setting

2.1

Connecting the phone

1.

Connect to the network. Use the Ethernet cable in the package to connect the WAN port on the back of

your phone to an Ethernet port. The following two figures show connection options.

a.

Direct network connection—This method requires at least one available Ethernet port. Connect the

WAN port on the back of your phone to the Ethernet port. Since the phone has a built-in router, it can

be connected directly to the network.

b.

Shared network connection—Use this method if you have a single Ethernet port which is already in use.

Disconnect the Ethernet cable from the Ethernet port and attach it to the WAN port on the back of the

phone. Then use the Ethernet cable in the package to connect the LAN port on the back of the phone to

the other device. The IP Phone now shares a network connection.

«
...
11
12
13
14
15
...
»

Summary of Contents for C62







































































































Reviews:

No comments

Related manuals for C62

Brand: HAFURY Pages: 60

Brand: NEC Pages: 36

Brand: NEC Pages: 4

Brand: NEC Pages: 3

Brand: Samsung Pages: 193

Brand: Samsung Pages: 168

Brand: OPlus Pages: 35

wego A-PLUS Series

Brand: Talk To Me Technologies Pages: 28

Brand: GS-hosted Pages: 26

Brand: Watchguard Pages: 12

Brand: Sony Ericsson Pages: 113

Brand: C.R. Laurence Pages: 2

Brand: Activexpression Pages: 20

INNOVAPHONE 200

Brand: TIPTEL Pages: 32

Brand: ALIGATOR Pages: 30

Brand: Xiaomi Pages: 9

Brand: CLOUDCONNECT Pages: 15

Brand: iPECS Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands