Rev.01
134/151
12.13 Test menu
The SIL-G device features a test menu for use to verify the LEDs and outputs.
2 key sequences are available to access to this test mode:
From the main menu enter the key sequence “◄”, “▼”, “►” and then press and hold “OK” until
the “Test menu” is display
ed, indicating that while the test menu is active, protection is
deactivated.
From the main menu hold “C” key until the “Test menu” is displayed, indicating that while the
test menu is active, protection is deactivated.
Pressing “OK” bring up the passwor
d introduction menu; if the correct password is inserted, the text
menu is accessed by pressing “OK” again (by default, he password is 5555). Navigate the menu using
the “▲” and “▼” keys. Press “OK” to toggle the state of each menu item (to activate it if
it is deactivated,
and to deactivate it if it is activated). Press “C” to leave the test menu.
Once the relay is in test menu mode all the LEDs will be activated simultaneously. In case of the outputs,
they will be activated or deactivated by pressing OK key:
Output 1
Not activated
Output not activated
Activated
Output activated
Output 2
Not activated
Output not activated
Activated
Output activated
Output 3
Not activated
Output not activated
Activated
Output activated
Output 4
Not activated
Output not activated
Activated
Output activated
Output 5
Not activated
Output not activated
Activated
Output activated
Output 6
Not activated
Output not activated
Activated
Output activated
Output 7
Not activated
Output not activated
Activated
Output activated
Output 8 (*)
Not activated
Output not activated
Activated
Output activated
Output 9 (*)
Not activated
Output not activated
Activated
Output activated
Output 10 (*)
Not activated
Output not activated
Summary of Contents for SIL-G
