Rev.04
85/112
BLINKING (different time on (T) and time off (T2))
To delete the configuration, SICOM or HMI can be used. Through SICOM it is necessary to remove the configured signals and send the new configuration to the
relay.
Through HMI, it is necessary to access to the output PGC or LED that is configured and press OK to visualize the configured signals. Being displaying the configured
options, hold reset key to delete them. After inserting the password, by pressing OK the action of removing the configured options is confirmed. It is necessary to
press RESET key as many times as signals are configured.
The configured signal will be activated the time set in “time up” parameter and will be switched off the time set in “period”
parameter less
the set in “time up” parameter:
Summary of Contents for SIL-A A Series
